Description
Feature:
1. Aluminium alloy tabs is reused Reusable and Will not break.
2. It can repair the dents on your car.
4. Slide hammer is more powerful for all kinds of dent,especially big dent.
5. Use widely for the sheet metal processing of automobile, refrigerator, motorcycle, washing machine, etc.
How to use this paintless dent repair kits:
1. Clean the dent with a clean wet cloth
2. Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes
3. Use a proper drawing gasket. Large dent requires a large drawing gasket
4. Pull the trigger and apply the drawing gasket with extruded glue
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen
8. Clean the repaired place with a clean wet cloth
Package list:
2 in 1 puller x 1
puller connector x 1
aluminium alloy x 4
glue sticks(11x270mm) x 3
towel x 1
shovels x 2
alcohol bottleï¼alcohol not include) x 1
View AllClose
1. Aluminium alloy tabs is reused Reusable and Will not break.
2. It can repair the dents on your car.
4. Slide hammer is more powerful for all kinds of dent,especially big dent.
5. Use widely for the sheet metal processing of automobile, refrigerator, motorcycle, washing machine, etc.
How to use this paintless dent repair kits:
1. Clean the dent with a clean wet cloth
2. Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes
3. Use a proper drawing gasket. Large dent requires a large drawing gasket
4. Pull the trigger and apply the drawing gasket with extruded glue
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen
8. Clean the repaired place with a clean wet cloth
Package list:
2 in 1 puller x 1
puller connector x 1
aluminium alloy x 4
glue sticks(11x270mm) x 3
towel x 1
shovels x 2
alcohol bottleï¼alcohol not include) x 1
